|
製品紹介 |
|
NEWS: MPL-808 圧力スイッチ |
MPL-808は小型で、動作圧力の微調整が可能な10 ~ 250psi (0.7 ~ 17.5kg/cm2)、耐圧35kg/cm2の信頼性の高い中圧用のプレッシャー・スイッチです。UL及びCSA規格のスナップ・アクション・コンタクト・エレメントのレバー・アーム駆動のダイフラム型の頑丈で、高精度、高信頼性のボディーがアルミ亜鉛合金の1/8インチNPTポート付きのプレッシャースイッチです。設定圧力は前もって所定の動作圧力にしてありますが、スプリングスクリューで圧力値の微調整を現場で行うことができます。電流容量は3~25アンペア、0.1~1.0HP(125/250VAC)です。また、ドライ・サーキットの場合には、0.1ミリアンペア用のコンタクト・ブレード、また用途によっては銀カドミウム、金合金クロスポイントなどの接点材も使用することが可能です。
規格 |
機能 と 利点 |
アプリケーション |
|
動作圧力: 10 psi ~ 250 psi
動作温度: -40℃ ~ 85℃
ボディ:アルミ亜鉛合金
ダイアフラム: ポリウレタン(標準)、他の素材も可
バースト圧力: 500 psi
接点形式: SPDT (単極双投)
ターミナル 3端子 0.020” x 0.187” オス タブ標準
3端子 0.032” x 0.250” が可能
特別 OEM ターミナルが可能
重量: 57 grams
スナップスイッチ: UL & CSA 規格
大きさ: 2.0 x 2.0 x 1.0 inch |
型、軽量、低価格
高圧が可能
広い動作温度範囲
単極、双投
スナップアクション
NPT フィッティング
高い信頼性 |
医療機器
装置
空気圧機器
自動化
産業の監視と制御 |
|
|
|
NEWS: オプトランド 溶融プラスチック射出成型圧力・温度一体型センサー 3Dプリンター用 Stratasys sensor with thermocouple
Sensorを発表 |
|
本製品は溶融プラスイチック成型、3Dプリンターなど製品に装着し、内部圧力及び温度を同時に測定できます。 |
|
|
|
NEWS: オプトランド 溶融プラスチック射出成型圧力センサー
AutoPSI-MSD Sensorを発表 |
|
|
|
Highlights of New Dynamic Pressure Sensors Plastic Melts
New process connections with diameters of: 1.0mm,
2.2mm, 2.5mm, and 4.0mm
1000 bar and 2000 bar pressure range
Process connection maximum temperature: 350oC
Sensors target mold cavity pressure measurement
18mm OD, 100mm long signal conditioner
1m-3m-long rugged fiber optic cable
Sensors connect to multi-sensor analyzer; up to 16
channels
To be introduced in Q2 2019
Highlights of AutoPSI-MSD Sensor to be Introduced in Q1 2019
Process connection of existing 700 bar, 450oC-rated
sensor with F3.8mm diaphragm & new 3000 bar, 350oCrated
sensor with F7.8mm diaphragm
7.8mm dia. diaphragm available with welded-in
thermocouple for plastic melt temperature measurement
0.5-9.5 V pressure & 0-4.5V temperature outputs
350oC- and 450oC-rated process connections
18mm OD signal conditioner, 110mm long
1m-3m-long fiber optic cable
Sensor reset at 0 pressure by either serial port command
or grounding of connector pin
Plastic Melt AutoPSI-SDT Sensor Target Specifications
Pressure range bar: 0-3000, overpressure 3500
0-1000, overpressure 2000
Frequency response: 0Hz to 1 kHz
Natural frequency kHz: >120
Pressure output V: analog 1-9
Temperature output V: analog 0-4.5 (0oC - 450oC)
Process connection temp. oC:-40… 350 or -40…450
Conditioner temp. oC: 0-100, calibrated 20-80
Power supply V: 9 40
Temperature det. accuracy: +/-1%
Repeatability %FSO: <0.2
Linearity %FSO: ±0.5
Pressure hysteresis %FSO: <0.1
Acceleration sensitivity bar/g: <0.1
Pressure output SNR: 100:1
Thermal zero shift %FSO: TBD
Sensitivity change %FSO: TBD
Zero drift %FSO: TBD |
|
NEWS: オプトランド 圧力センサーが耐熱最高温度を450°Cに拡張 |
Optrand Extends Maximum Temperature Rating of Its Pressure Sensors to 450°C
Optrand pressure sensors are now rated for operation at temperatures up
to 450°C (840°F) without cooling.
Benefitting from a metal coated optical fiber and ultra-high temperature
glass seal, the sensor head (process connection) of Optrand’s pressure
sensor can be exposed for thousands of hours to temperatures as high as
450°C without cooling. Such capability is available even for subminiature
devices 1.8mm in diameter. Furthermore, the 450°C-rated sensors can measure
very small or very large pressures, ranging from 0-1 bar up to 0-3000 bar.
Unlike alternative high temperature piezoelectric or piezo-resistive pressure
sensors which can be exposed to maximum temperatures only at their front
surfaces, the entire sensor head and even a part of the cable of the Optrand
sensor can be exposed to 450°C.
These sensors can continuously measure dynamic pressure or both static
and dynamic pressurecomponents intermittently. The ultra-high temperature
capability is not associated with anincreased signal noise observed in
the alternative pressure sensors. Finally, Optrand’s 450°Crated sensors
cost a fraction of the competing piezoelectric dynamic or piezoresistive
staticdynamic transducers.
“The new enhanced capability to measure pressure without cooling at temperatures
up to 450°C for thousands of hours enables a wide range of applications
previously not available to our sensors” says Dr. Marek T. Wlodarczyk,
Optrand’s President & CEO. “A few examples include
pressure measurement of plastic melts requiring sub-miniature sensors,
monitoring and control of stationary and aviation turbines, measurement
of engine exhaust pressure, and tuning of Formula One and other racing
engines”.
About Optrand
Optrand, Inc. is a Plymouth, Michigan based developer, manufacturer, and
licensor of high
temperature fiber optic pressure sensors for engine and industrial applications. |
|